IOGear Q1257-d Quick Start Manual page 12

Direct Button Mapping
Direct Button Mapping Mode
Direct Button Mapping allows you to change keyboard or mouse maps
without connecting KeyMander to your PC. Direct Button Mapping requires
connection of your PS/Xbox controller to the KeyMander for basic setup.
To use Direct Mapping:
1. Connect your controller using your USB cable to the Gamepad port on the
KeyMander.
2. Press Share + Options (PS4), Select + Start (PS3), Back + Start (Xbox)
or View + Menu (Xbox One) buttons at the same time. You will hear 1
beep from KeyMander and the Setting LED will flash slowly.
3. Press PS, Xbox Guide, or Xbox button. KeyMander will beep once again
and Setting LED will now flash rapidly. You are now in Direct Mapping
Mode.
a. Press the desired PS/Xbox controller button you wish to map.
KeyMander will beep once to confirm.
b. Press any key on the keyboard or mouse and the controller button will
be mapped to that key. KeyMander will beep once to confirm.
c. Continue steps 3a & 3b until all desired buttons have been mapped to
keyboard or mouse.
4. Press Share + Options (PS4), Select + Start (PS3), Back + Start (Xbox)
or View + Menu (Xbox One) buttons at the same time to exit Direct
Mapping Mode. KeyMander will beep twice and the Setting LED will stop
flashing.
2
SHARE OPTIONS
3
Note:
Changes made to Direct Mapping Mode are not permanently saved
to a profile.
2
L R
3
11
2
3