Firmware Upgrade - IOGear Q1257-d Quick Start Manual

Firmware Upgrade

Upgrading KeyMander Firmware
To upgrade the firmware on your KeyMander, follow the steps below:
1. Go to www.IOGEAR.com/software/GE1337P/
2. Select the latest firmware link and download to your PC.
3. Once finished, unzip the file and remember the saved location.
4. Connect your KeyMander to your PC:
a. Plug one of the included mini USB B cables to the PC Port located on
the back of the KeyMander.
b. Plug the other included mini USB B cable to the Power Port located on
the back of the KeyMander.
c. Connect both USB cables to your PC
5. Launch the KeyMander software and click "Ready".
6. On the main page, click "Help" then "Upgrade Firmware".
7. Locate the unzipped "firmware.exe" file and click "Open".
8. The KeyMander software will close and the KeyMander firmware upgrade
utility will launch automatically.
9. Click "Next" to begin the upgrade process. When the firmware upgrade is
complete, click "Finish" and the utility will close.
16