Installing the display panel
1. Connect the eDP cable to the connector and affix the blue tape.
2. Affix the adhesive tape to secure the eDP cable.
3. Replace the display panel to align with the screw holders on the display assembly.
4. Tighten the M2x3 screws to secure the display panel to the display assembly.
5. Install the:
a.
b.
display assembly
c.
hinge cap
d.
WLAN card
e.
battery
f.
base cover
6. Follow the procedure in
Display (eDP) cable
Removing the eDP cable
1. Follow the procedure in
2. Remove the:
a.
base cover
After working inside your
Before working inside your
computer.
computer.
Disassembly and reassembly
45