WWAN card
Removing the WWAN card
1. Follow the procedure in
2. Remove the:
a.
base
cover.
b. battery.
3. To remove the WWAN card:
a. Disconnect the WWAN cables from the connectors [1].
b. Remove the M2.0 x 3.0 screw that secures the metal bracket to the WWAN card [1].
NOTE:
The WWAN card pops out by an angle 15°.
c. Lift the metal bracket that secures the WWAN card [2].
Installing the WWAN card
1. Insert the WWAN card into the slot on the .
2. Install the:
a.
battery
b.
base cover
3. Follow the procedure in
Before working inside your
After working inside your
computer.
system.
Disassembly and reassembly
19