Installing the SmartCard reader
1. Place the SmartCard reader on the .
2. Tighten the M2x3 screws to secure the SmartCard reader to the .
3. Affix the SmartCard reader cable and connect the cable to the connector on the system board.
4. Install the:
a.
chassis frame
b.
SSD card
c.
battery
d.
base cover
5. Follow the procedure in
LED board
Removing the LED board
1. Follow the procedure in
2. Remove the:
a.
base cover
b.
battery
c.
WLAN card
d.
SSD card
34
Disassembly and reassembly
After working inside your
Before working inside your
computer.
computer.