Installing the coin cell battery
1. Place the coin cell battery on the system board.
2. Connect the coin cell battery cable to the connector on the system board.
NOTE:
Route the coin cell battery cable carefully to avoid damaging the cable.
3. Install the:
a.
chassis frame
b.
battery
c.
base cover
4. Follow the procedure in
WLAN card
Removing the WLAN card
1. Follow the procedure in
2. Remove the:
a.
base cover
b.
battery
3. To remove the WLAN card:
a. Remove the M2x3 screw that secures the WLAN card to the [1].
b. that secures the WLAN cables to the WLAN card [2].
After working inside your
Before working inside your
computer.
computer.
Disassembly and reassembly
17