Installing The Optional Smartcard Reader Board; Fingerprint Reader; Removing The Optional Finger Print Reader Board - Dell Latitude E5470 Owner's Manual

Installing the optional SmartCard reader board

1. Insert the SmartCard reader board into the slot on the computer.
2. Tighten the screws to secure the SmartCard reader board to the computer.
3. Connect the SmartCard reader cable to the connector on the USH board.
4. Install the:
a. dock frame
b. WWAN card
c. WLAN card
d. hard drive assembly
e. battery
f. base cover
5. Follow the procedure in

Fingerprint reader

Removing the optional finger print reader board

1. Follow the procedure in
2. Remove the:
a. base cover
b. battery
c. hard drive assembly
d. WLAN card
e. WWAN card
f. dock frame
3. To remove the finger print reader board:
a. Disconnect the finger print reader cable from the finger print reader board [1, 2].
b. Remove the screw that secures the finger print reader board to the computer [3].
c. Lift the finger print reader board from the computer [4].
or M.2 SSD or PCIe SSD
After working inside your
Before working inside your
or M.2 SSD or PCIe SSD
computer.
computer.
Disassembly and reassembly 27