Steps
1. Align the notch on the SSD with the tab on the M.2 slot and slide the SSD into the M.2 card slot on the system board.
2. Replace the screw (M2x2) that secures the SSD to the system board.
3. Replace the SSD shield, press to fit it firmly to cover the SSD, securing it with (M2x2) screw.
Next steps
1. Install the
base
cover.
2. Install the
microSD
card.
3. Follow the procedure in
WWAN card
Removing the WWAN card
Prerequisites
1. Follow the procedure in
2. Remove the
microSD
3. Remove the
base
cover.
About this task
The following images indicate the location of the WWAN card and provide a visual representation of the removal procedure.
24
Removing and installing components
after working inside your
before working inside your
card.
computer.
computer.