Edimax BR6216MG User Manual page 71

Hop Count
Interface
Add a Rule
Remove a Rule
Click <Apply> at the bottom of the screen to save the above configurations. You can now
configure other advance sections or start using the router (with the advance settings in place)
The number of hops (routers) to pass through to
reach the destination LAN.
The interface that go to the next hop (router).
Fill in the "Destination LAN IP", "Subnet Mask",
"Default Gateway", "Hop Count" and "Interface" of
the rule to be added and then click "Add". Then this
rule of Static Routing will be added into the "Static
Routing Table" below. If you find any typo before
adding it and want to retype again, just click
"Reset" and the fields will be cleared.
If you want to remove some routing rules from the
"Static Routing Table", select the rules you want to
remove in the table and then click "Delete Selected".
If you want remove all rules from the table, just
click "Delete All" button. Click "Reset" will clear
your current selections.
71