Edimax BR6216MG User Manual page 33

Parameters
Host Address
Port
Description
This is the IP address of the
management/configuration access to the Broadband router from a
remote site. This means if you are at home and your home IP address
has been designated the Remote Management host IP address for this
router (located in your company office), then you are able to configure
this router from your home. If the Host Address is left 0.0.0.0 this means
anyone can access the router's web-based configuration from a remote
location, providing they know the password.
Click the Enabled box to enable the Remote Management function.
Note: When you want to access the web-based management from a
remote site, you must enter the router's WAN IP address (e.g. 10.0.0.1)
into your web-browser followed by port number 8080, e.g. 10.0.0.1:8080
(see below). You'll also need to know the password set in the Password
Setting screen in order to access the router's web-based management.
The port number of remote management web interface.
host in the Internet that will have
33