Edimax BR6216MG User Manual page 11

Mimo wireless broadband router
Hide thumbs Also See for BR6216MG:
Table of Contents

Advertisement

6: Click OK to confirm the setting. Your PC will now obtain an IP address automatically
from your Broadband Router's DHCP server.
Note: Please make sure that the Broadband router's DHCP server is the only DHCP server
available on your LAN.
Once you've configured your PC to obtain an IP address automatically, please proceed to
Step 3.
2d) Windows NT
1: Click the Start button and select Settings, then click Control Panel. The Control Panel
window will appear.
2: Double-click Network icon. The Network window will appear. Select the Protocol tab from
the Network window.
3: Check if the TCP/IP Protocol is on your list of Network Protocols. If TCP/IP is not
installed, click the Add button to install it now. If TCP/IP is installed, go to step 5.
4: In the Select Network Protocol window, select the TCP/IP Protocol and click the Ok
button to start installing the TCP/IP protocol. You may need your Windows CD to
complete the installation.
5: After you install TCP/IP, go back to the Network window. Select TCP/IP from the list of
Network Protocols and then click the Properties button.
6: Check each of the tabs and verify the following settings:
IP Address: Select Obtain an IP address from a DHCP server.
DNS: Let all fields are blank.
WINS: Let all fields are blank.
Routing: Let all fields are blank.
11

Advertisement

Table of Contents
loading

Table of Contents