Janome CoverPro 3000 Instruction Book page 20

c v
t
b n m
!0
c Draw the thread along the slit and pass it through the
v Pass the thread through thread guide (A) from the
y
u
b Draw the thread to the left and pass it through thread
n Draw the thread up and slip it behind the take-up lever
o
i
m Pull the thread down and slip it behind thread guide (C)
17
tension dial.
t Tension dial
y Tension disks
NOTE:
Hold the thread at both ends and tug gently to ensure
the thread is correctly inserted between the tension
disks.
right.
u Thread guide (A)
guide (B).
cover.
i Thread guide (B)
o Take-up lever cover
from the right.
!0 Thread guide (C)