Installation; Connect Your Equipment - EchoStar DSB-2200 2Ci User Manual

INSTALLATION

1.

CONNECT YOUR EQUIPMENT

It is possible to connect the different equipment with the use of UHF coaxial cables,
SCART cables, and/or so called audio/video cables with RCA connectors.
WARNING
ALL EQUIPMENT INVOLVED IN THE INSTALLATION TASK MUST BE INSTALLED CORRECTLY
AND SWITCHED OFF
. U
TASK
TO EQUIPMENT
C
ONNECTION WITH
1. On the TV, find the UHF-coaxial cable that is connected to the terrestrial antenna or cable
network.
2. Remove the UHF-coaxial cable from the TV and make sure the cable condition is OK.
3. On the rear panel of the receiver find the TV OUT connector.
4. Install an UHF-coaxial cable between the TV OUT connector (receiver) and the antenna
connector (TV).
5. On the rear panel of the receiver find the ANT IN connector.
6. Install the UHF-connector (terrestrial antenna) to the ANT IN connector (receiver).
C
ONNECTION WITH
1. On the TV find the SCART cable that is connected to the VCR.
2. Remove the SCART connector that is connected to the VCR from the TV.
3. On the rear panel of the receiver find the TV and VCR SCART connectors.
4. Install the SCART cable between the VCR and the VIDEO SCART connector (receiver).
5. Install a full featured SCART cable between the TV SCART connector (receiver) and the
SCART connector on the TV (old SCART connection to the VCR).
C W
ONNECTION
1. On the rear panel of the receiver find the VIDEO, AUDIO L and AUDIO R connectors.
2. Install an audio/video cable between:
a. the VIDEO connector of the receiver and TV (yellow);
b. the AUDIO L connector of the receiver and TV (white);
c. the AUDIO R connector of the receiver and TV (red).
C
ONNECTION WITH
1. On the rear panel of the receiver find the S/PDIF connector.
2. Install an audio/video cable (black) between:
a. the S/PDIF connector (receiver) and Dolby Digital connection of the Dolby digital
compatible installation.
C
ONNECTION WITH SERIAL CABLE
1. On the rear panel of the receiver find the SERIAL PORT connector.
2. Install a serial cable between the SERIAL PORT connector (receiver) and the serial port
connection of the PC.
Digital Satellite Receiver
. M
AKE SURE THAT IT IS SAFE TO PROCEED WITH THE INSTALLATION
NSAFE CIRCUITS AND INSTALLATIONS CAN CAUSE
.
UHF
COAXIAL CABLES
SCART
CABLES
A /
ITH UDIO VIDEO CABLE
D D
OLBY IGITAL AUDIO CABLE
(0-
MODEM CABLE
Installation
(
SERIOUS
(RCA- )
CONNECTORS
(RCA-
CONNECTORS
)
Section 3
)
INJURY OR DAMAGE
)
Page 3 - 1
3