Remote Control Unit; To Install The Receiver; First Time Installation; Operation - EchoStar T-222 FTA User Manual

Quick Reference Guide
2. T
O INSTALL THE RECEIVER
WARNING
ALL EQUIPMENT INVOLVED IN THE INSTALLATION
TASK MUST BE INSTALLED CORRECTLY AND
. M
SWITCHED OFF AKE SURE THAT IT IS SAFE TO
PROCEED WITH THE INSTALLATION TASK
U
NSAFE CIRCUITS AND INSTALLATIONS CAN
( )
CAUSE SERIOUS INJURY OR DAMAGE TO
.
EQUIPMENT
Please connect your equipment in accordance
with the diagram as shown on the gift box.
The available connectors on the rear are:
ANT IN
(IEC) - for the
connection of a terrestrial
antenna.
TV OUT (IEC),
connection of a VCR or TV
(analog signals only).
TV (SCART)
connection of a TV.
RS-232 (special), for the
connection to the serial
communication port of a PC
12/24Vdc, for the
connection of the adapter
that came with the receiver
or another secure
12Vdc/24Vdc source.
3. F
IRST TIME INSTALLATION
1. Make sure, all connections are made safely.
2. Switch on the receiver and wait for the
Guided setup menu.
3. Press the green key and wait for the search
channels to complete.
Page 2
4. O
PERATION
4.1. B
ASIC NAVIGATION
■
the MENU key lets you access to the main
menu or go back one menu level;
■
the EXIT key lets you leave a menu or
.
selection and return directly to live;
■
the
selectable items;
■
the OK key lets you confirm and execute a
selection or open a pull-down menu.
4.2. T
HE PROGRAM INFORMATION
for the
The InfoBanner has a:
■
The channel information bar, to show the
for the
, local time, channel name and local date.
■
The service information bar, to show the
progress of the current program.
■
The icons represent the following
messages:
- the
active.
- the
encrypted (Scrambled);
- the
languages are available;
- the
available.
keys let you scroll through the
icon, to show that a sleep timer is
icon, to show that the channel is
icon, to show that more Subtitle
icon, to show that teletext is
■
The program information bar, to show:
- the channel number;
- the now and next program information;
- the audio indicator, to show that more
audio languages are available;
- The channel indicator, to show the
channel of the terrestrial service.
- the signal indicator, to show the signal
level (strength).
■
Detailed program and channel information
show when you press the i-key on the
remote control unit two or three times.
4.3. T
IMERS
CAUTION
The timer does not start or program your
video cassette recorder (VCR). You also
have to set the timer of your VCR to the
same time as on the timer. Please refer to
the user guide of your VCR how to make a
recording from an external receiver.
If the InfoBanner shows the now/next
information:
1. Press the EPG key.
2. Press the red key and program the timer.
3. If required, select an interval.
4. Press the OK key to confirm.
If the InfoBanner does not show the now/next
information:
1. Press the MENU key.
2. Press the blue key.
3. Select: User data - Preferences - Timers.
4. Press the OK key and program the timer.
5. If required, select an interval.
6. Press the OK key to confirm.
EchoStar International Corporation
User Guide