EchoStar DSB-2200 2Ci User Manual page 26

Familiarization
Section 4
2.2.5. ABOUT ECHOSTAR
The About EchoStar menu gives all the where-to-contact-Information about EchoStar and the
status information about the receiver. You can view:
2.2.6. SYSTEM UPGRADE PAGE
This menu page allows you to upgrade the receiver's software. EchoStar provides software
updates Over-The-Air (OTA) which means that you can upgrade your system via the satellite.
If you are not able to receive the satellite/transponder, you always can upgrade the software
through the SERIAL PORT (RS232) at the rear of the receiver and the downloaded software
from the EchoStar website.
Page 4 - 10
Company
This field shows the full name of EchoStar.
Address
This field shows the address of EchoStar.
S/W version
This field shows the current software version
loaded into the receiver.
Boot version
This field shows the current boot version loaded
into the receiver.
Web site
This field shows the EchoStar web site where you
can find the latest user and software information.
Location
To select the default or user defined satellite where
you want to download from.
Satellite
To set the satellite where you want to download
from.
TP frequency
To set the transponder where you want to
download from.
Polarity
To set the correct polarity for the transponder.
Symbol rate
To set the correct symbol rate for the transponder.
FEC
To set the correct Forward Error Correction for the
transponder
EchoStar DSB2200 2Ci