To Do A Factory Reset - EchoStar DSB-2200 2Ci User Manual

2.4. TO DO A SOFTWARE UPDATE FROM THE SATELLITE
1. On the RCU, press:
a. the MENU key;
b. the key to select the
c. the OK key, to select the
2. Press the OK key and make the selections.
3. Read the available help text for information.
4. Go to the System Upgrading field.
5. On the RCU, press the OK key.
6. Wait for the system upgrade to complete.
WARNING
D
O NOT PRESS ANY KEYS DURING THE SESSION
CAN INTERRUPT THE SOFTWARE UPGRADE SEQUENCE
WHICH CAN DAMAGE THE RECEIVER PERMANENTLY
NOTE
EchoStar offers software updates via the satellite (Hotbird) and via the EchoStar
website. If you have trouble to get a download with the latest software version,
please ask your retail seller or dealer for assistance.

2.5. TO DO A FACTORY RESET

NOTE
Be sure if you select Memory Erase because all your personal settings will be
deleted and replaced with the factory settings. Some of the personal settings that
will be deleted are Parental Lock, Favorite lists and System setup. Memory erase
resets the receiver as if the receiver comes just out of the box.
1. On the RCU, press:
a. the MENU key;
b. the key to select the
c. the OK key, to select the
2. Press the OK key and make the selections.
3. Read the available help text for information.
4. Go to the Confirm Reset field.
5. On the RCU, press the OK key.
Digital Satellite Receiver
menu;
menu.
,
THIS
.
menu;
menu.
Maintenance
Section 6
The receiver display shows:
- ota (check for new software)
- d1...d100 (downloading)
- P1...P100 (upgrading)
- done (update memory)
- C.... (channel indication)
Page 6 - 3
6