Register Your Printer; Technical Assistance - Brady BMP21-LAB Quick Start Manual

Label printern

Hide thumbs Also See for BMP21-LAB:

Table of Contents

Available languages

REGISTER YOUR PRINTER

For troubleshooting and FAQs, visit:

http://www.qualityserviceandsupport.com/brady

Other techncial assistance

contact numbers can be

found on the back cover of

this manual. When

contacting a

representative, have your

serial number (located

inside the cartridge bay)

available.

BATTERIES

1. On the back of the printer, squeeze the finger tabs

located on both sides of the battery compartment door,

then swing the battery compartment door up and out.

(The door will come off.)

2. Insert 6 AA alkaline batteries or the optional BMP21-

PLUS-BATT rechargeable battery pack. (Do not use

rechargeable AA batteries or Ultimate Lithium AA bat-

teries).

Note: The lithium Ion battery pack accessory cannot

be charged within the printer.

3. Re-insert the battery door hinge at the top of the com-

partment and push down on the battery compartment

door, snapping it into place.

BMP

21-LAB

English

Table of Contents