Table of Contents
Advertisement
CLEANING
Disconnect the washing machine from the power mains and open the door. Clean the washing machine drum
with a damp cloth and a mild detergent.
Connect the washing machine to the power mains and run the dedicated drum cleaning program. See
chapter "WASHING PROCESS" /STEP 5: CHOOSE THE PROGRAM.
No program can be started while the door is open.
SETTINGS BEFORE FIRST USE
After connecting the washing machine and power it for the fi rst time, you will be asked to do following
settings:
1. Language selection
Use the Program selector knob or buttons to scroll the list of languages.
Confi rm the selection by pressing the "Set" button.
2. Water hardness
The following water hardness settings are available: soft / normal / hard.
How to use the test strip:
1. Turn on the water tap and let the water run for a minute or so.
2. Fill a glass with cold water.
3. Remove the test strip from its packaging.
4. Dip the test strip in the water for about one second.
5. Wait one minute. Now compare the colours of the squares with the water hardness table.
Test strip
4 green
1 red
2 red
3 red
4 red
Table for water hardness; See chapter "SETTINGS/WATER HARDNESS".
Confi rm your selection with the button under the selected water hardness.
Press the "Next" button to confi rm your selection.
For further washing process, see chapter "WASHING PROCESS".
°dH
°fH
< 3
< 5
> 4
> 7
> 7
> 12
> 14
> 25
> 21
> 37
Customer Care Center, 1-800-898-1879, www.askona.com
9
Advertisement
Table of Contents
