Asko W6124X.W.U Instructions For Use Manual page 33

The door may be opened when the water is pumped from the machine (but not completely pumped out).
Then, add or remove the laundry. Close the door and continue the program. Press the Start
The program will resume from the point at which it was interrupted.
Warm
Pausing, stopping or changing the program
Warm
Warm
To stop the washing program, press the Start/Pause button and hold it for 3 seconds.
Choose "Stop program". The program is canceled and the water is pumped out of the machine if necessary.
Only then will you be able to open the washing machine door. Use the Program selector knob to select a new
program. If necessary, add detergent, and then press the Start
If the temperature in the drum is very high, then cooling procedure starts before program is canceled.
A washing program can be paused by pressing the ON/OFF button.
The washing machine will switch off .
After the washing machine is switched on, press the Start
Do not open the detergent compartment while the appliance is operating.
In some cases the door may be locked although no program is in progress (e.g. in case of an error). To
unlock the door, press the Start/Pause button and hold it for a while.
Door unlocked
Ready to resume
Resuming wash
Customer Care Center, 1-800-898-1879, www.askona.com
If the door cannot be opened, it is
possible that the temperature in the
01:41
machine is too high, and you won't be
Stop program
able to add the laundry.
Also, if the door cannot be opened, it
is possible that the program has been
running for too long and any laundry
added at that point would not be
effi ciently washed.
To pause the program, shortly press the
Start/Pause
01:41
Stop program
To resume a program, press the Start
/Pause button again.
01:40
/Pause button.
button to resume the program.
/Pause button.
button.
33