3
Load Registration Single
The Load Registration Single function is used to load a single CN39 registration file stored on a USB memory device
into one of the instrument's registration memories.
* This function will overwrite the selected Registration memory.
* For more information about the instrument's Registration feature, please refer to page 34.
1. Selecting the Load Registration Single function
After entering the USB Menu (page 114):
Press the or buttons to select the Load Registration Single
function.
2. Selecting the registration memory
Press the or buttons to select the registration memory for
the new registration to be loaded into.
Press the
FUNCTION button (ENTER).
The file selection screen will be shown in the LCD display, listing
CN39 song files stored on the USB memory device.
3. Selecting the registration file to be loaded
Press the or buttons to move the selection cursor, then
press the
FUNCTION button (LOAD) to select the registration
file.
A confirmation message will be shown in the LCD display,
prompting to confirm or cancel the load operation.
4. Confirming the load operation
Press the
FUNCTION button (YES) to confirm the load
operation, or the
FUNCTION button (NO) to cancel.
5. Exiting the Load Registration Single function
Press the
FUNCTION button (BACK) to exit the Load
Registration Single function and return to the Function Menus
screen.
To use the loaded registration, please refer to the Registration
instructions on page 34.
117