3. Changing the split point
Press and hold the
FUNCTION button (4HAND), then press the
desired split key on the keyboard.
The name of the pressed key will briefly be shown in the LCD
display, and will become the new split point.
Split Mode settings
The Split Mode settings menu allows characteristics of the Split Mode sound and operation to be adjusted.
Split Mode settings
Split Mode setting
Description
Balance
Adjust the volume balance between the upper and lower sections.
Lower Octave Shift
Raise/lower the pitch of the lower section sound in octave steps.
Lower Pedal
Enable/disable the sustain pedal for the lower section sound.
Split Point
Specify the point along the keyboard that divides the upper and lower sections.
Entering the Split Mode settings menu
While the Split Mode screen is shown in the LCD display:
Press the
FUNCTION button (EDIT).
The Split Mode settings menu will be shown in the LCD display.
Adjusting Split Mode settings
After entering the Split Mode settings menu:
Press the or buttons to move the selection cursor over the
desired setting.
Press the or buttons to adjust the selected setting.
* To reset the current setting to the default value, press the and
buttons simultaneously.
Lower section
New split point
* Preferred Split Mode settings can be stored to a Registration memory
for convenient recall, or to the Startup Setting memory for automatic
selection when the instrument is turned on. Please refer to pages
35 and 79 for more information.
Upper section
Default setting
9 - 9
0
Off
C4
buttons:
Adjust selected setting.
buttons:
Move selection cursor.
23