Table of Contents
Advertisement
Assembly Instructions
5. Connecting the power adaptor & pedal cables
Connect the AC/DC power adaptor to the DC IN terminal
on the underside of the main body, then pass the cable
through the back board aperture, and out to the rear of the
instrument.
Pass the pedal cable (extending from the rear of the pedal
board) through the aperture to the front of the main body,
and connect to the PEDAL terminal.
With the power adaptor and pedal cables connected, use the
binders to fix the cables in place and tidy their appearance.
To avoid damaging the plugs or bending
the pins, connect the plugs with the correct
orientation, and do not apply excessive force
when connecting.
134
6. Attaching the headphone hook (optional)
A headphone hook is included with the CN39 digital piano and can
be used to hang headphones when not in use.
If desired, attach the headphone hook to the underside of
the main body using the two tapping screws provided.
7. Adjusting the pedal support bolt
Turn the pedal support bolt anti-clockwise, extending the
bolt until it makes contact with the floor and supports the
pedals firmly.
When moving the instrument, always adjust or
remove the pedal support bolt, then readjust
when the instrument is in its new position.
Advertisement
Table of Contents
