Load Registration - Kawai ES920 Owner's Manual

2

Load Registration

The Load Registration function is used to load registration memories stored on a USB memory device into the
instrument's internal memory. There are two types of registration file: "Single" and "All".
 R egistration file types
Registration type Description
Single A file containing a single registration memory.
All A file containing all 28 registration memories.
1. Selecting the Load Regist function
Connect a USB memory device, then press the USB button to
enter the USB Menu.
Press the or MENU buttons then the VALUE
select the Load Regist function.
The file selection screen will be shown in the display, listing the
registration files stored on the USB memory device.
* Please refer to page 50 for information about the file selection
screen.
2. Selecting the registration file to be loaded
Press the or VALUE buttons to move the selection cursor,
then press the MENU button to select the registration file.
The memory selection screen will be shown in the display.
3. Selecting the registration memory
Press the or VALUE buttons to select the registration
memory for the registration to be loaded into.
* If an "All Registration" file is selected, this step will be skipped.
4. Loading the selected registration
Press the (REC) button to load the selected registration.
A confirmation message will be shown in the display.
Press the VALUE button to confirm the load operation.
Press the EXIT button to cancel the load operation.
To use the loaded registration, please refer to the Registration
instructions on page 36.
button to
File extension
KM6
KM3
Registration file
63