5
Converting a song to an audio file
This function allows recorder songs stored in internal memory to be played back and saved (converted) as an audio
file to a USB device in either MP3 or WAV format.
1. Selecting the Convert to Audio function
After entering the Internal Recorder edit menu (see page 53):
Press the or buttons to move the selection cursor over the
Convert to Audio function.
Press the
FUNCTION button (ENTER) to select the Convert to
Audio function.
* If a USB memory device is not connected, a prompt will be shown.
2. Selecting the song/part to be converted
Press the or buttons to move the selection cursor over the
song memory or part.
Press the or buttons to change the selected song memory
(1-10) or part (1, 2, or 1&2) to be converted.
If a part has already been recorded, a
Press the
FUNCTION button (NEXT) to continue.
3. Selecting the audio file format
Press the or buttons to select the desired file format for the
converted song.
It is also possible to adjust the recording gain at this stage.
* For more information about the instrument's audio recorder gain
setting, please refer to page 56.
4. Starting the conversion
Press the PLAY/STOP button, or a key on the keyboard.
The LED indicator for the PLAY/STOP and REC buttons will turn
on, the selected song will play, and the convert to audio process
will start.
* Notes played on the keyboard will also be recorded to the audio file.
Naming and saving the converted audio file
Please follow the 'Recording an MP3/WAV audio file' instructions on pages 56~57. from step 4.
*
symbol will be shown.
buttons:
Move selection cursor.
buttons:
Select song memory/part.
buttons:
Move selection cursor.
buttons:
Select audio recorder format.
55