Specifications - SWR WorkingPro 400 Service Manual

MODEL:
PART NUMBERS:
POWER REQUIREMENT:
POWER AMP MINIMUM IMPEDANCE:
SENSITIVITY:
POWER OUTPUT:
PRE AMP INPUT IMPEDANCE: 3.9M
SENSITIVITY AT FULL POWER: 15mV
TONE CONTROLS–
MIDRANGE SEMI-PARAMETRIC EQ: ±15dB @ MID FREQ frequency
BASS INTENSIFIER: ±15dB below CUTOFF freq
EFFECTS LOOP– SEND IMPEDANCE: 2k
RETURN IMPEDANCE: 27k
UNBALANCED LINE OUT– SEND IMPEDANCE: 1k
BALANCED LINE OUT– SEND IMPEDANCE: 1.5k
FOOTSWITCH (INCLUDED):
LINE FUSE– 110V-120V MODELS: T8A, 250V
230V-240V MODELS: T4A, 250V
DIMENSIONS–
WEIGHT:

SPECIFICATIONS

WorkingPro™ 400
4450200010 (120V, 60Hz) USA
840 W
4Ω
700mV RMS, 1kHz
405W RMS into 4@ < 0.1% THD, 1kHz
250W RMS into 8@ < 0.1% THD, 1kHz
BASS: ±15dB @
TREBLE: ±15dB @ 2kHz
TRANSPARENCY: ±15dB @ 5kHz
2-button, Mute, Bass Intensifier
(P/N 065436)
HEIGHT: 3.5 in (8.9 cm)
WIDTH: 19 in (48.3 cm)
DEPTH: 13.5 in (34.3 cm)
25 lb (11.25 kg)
Product specifications are subject to change without notice.
WorkingPro™ 400 & 700
(This is the model name for warranty claims)
WorkingPro™ 700
4450000010 (120V, 60Hz) USA
1440 W
4Ω
1V RMS, 1kHz
710W RMS into 4@ < 0.1% THD, 1kHz
440W RMS into 8@ < 0.1% THD, 1kHz
3.9M
20mV
100Hz ±15dB @ 100Hz
±15dB @ 2kHz
±15dB @ MID FREQ frequency
±15dB below CUTOFF freq
±15dB @ 5kHz
2k
27k
1k
1.5k
2-button, Mute, Bass Intensifier
(P/N 065436)
T15A, 250V
T8A, 250V
3.5 in (8.9 cm)
19 in (48.3 cm)
13.5 in (34.3 cm)
25 lb (11.25 kg)
3