Engine Coolant; Checking - Mercury 92‑813054A2 Manual

11. Reinstall the filter element.
b
a
Improper installation of the transmission fluid filter assembly may cause the fluid to foam or leak out, resulting in decreased
efficiency and damage to the transmission. Properly seat the transmission fluid filter during installation.
12. Replace the securing tab over the filter assembly by turning it clockwise.
13. Tighten the assembly nut to the specified torque.
Description
Assembly nut
14. Fill the transmission to the proper level with the specified fluid. See Add Fluid.

Engine Coolant

A sudden loss of pressure can cause hot coolant to boil and discharge violently resulting in serious injury from burns. Allow
the engine to cool down before removing the coolant pressure cap.

Checking

IMPORTANT: Check the engine coolant before starting the engine.
1. Allow the engine to cool.
2. Remove the pressure cap from the coolant expansion tank.
90-8M0069748 APRIL 2012
eng
24620
b
a
a - Filter element
b - O‑ring
NOTICE
a -
b -
24621
CAUTION
!
Section 5 - Maintenance
Assembly nut
Securing tab
Nm lb‑in.
5‑8 48‑72
lb‑ft
Page 53