Mercury 92‑813054A2 Manual page 2

Table of Contents

Advertisement

This declaration of conformity is issued under the sole responsibility of the manufacturer. I declare on behalf of the engine
manufacturer that the engine(s) will meet the exhaust emission requirements of Directive 94/25/EC as amended by Directive
2003/44/EC when installed in a recreational craft, in accordance with the engine manufacturer's supplied instructions and that
this (these) engine(s) must not be put into service until the recreational craft into which it is (they are) to be installed has been
declared in conformity with the relevant provisions of the above mentioned Directives.
Name / function:
Mark Schwabero, President, Mercury
Marine
Regulatory contact:
Regulations and Product Safety Department
Mercury Marine
W6250 W. Pioneer Road
Fond du Lac, WI 54936
USA
Identification Record
Please record the following information:
Engine Model and Horsepower
Transmission Model (Inboard)
Propeller Number
Hull Identification Number (HIN)
Boat Manufacturer
Exhaust Gas Emissions Certification Number
The serial numbers are the manufacturer's keys to numerous engineering details that apply to your Mercury Diesel power
package. When contacting Mercury Marine about service, always specify model and serial numbers.
Descriptions and specifications contained herein were in effect at the time this guide was approved for printing. Mercury
Marine, whose policies are based on continuous improvement, reserves the right to discontinue models at any time or to
change specifications or designs without notice and without incurring obligation.
Mercury Marine, Fond du Lac, Wisconsin, U.S.A. Printed in U.S.A.
Mercury, Mercury Marine, MerCruiser, Mercury MerCruiser, Mercury Racing, Mercury Precision Parts, Mercury Propellers,
Quicksilver, #1 On The Water, Alpha, Bravo, Bravo Two, Bravo Three, MerCathode, SmartCraft, Zero Effort, M with Waves
logo, Mercury with Waves logo, VesselView, and SmartCraft logo are all registered trademarks of Brunswick Corporation.
Mercury Product Protection logo is a registered service mark of Brunswick Corporation.
Welcome
You have selected one of the finest marine power packages available. It incorporates numerous design features to assure
operating ease and durability.
With proper care and maintenance, you will thoroughly enjoy using this product for many boating seasons. To ensure
maximum performance and carefree use, we ask that you thoroughly read this manual.
The Operation, Maintenance, and Warranty Manual contains specific instructions for using and maintaining your product. We
suggest that this manual remain with the product for ready reference whenever you are on the water.
Signature and title:
Date and place of issue: April 20, 2012
Engine Serial Number
Gear Ratio
Transmission Serial Number
Pitch
Diameter
Purchase Date
Boat Model
Length
Fond du Lac, Wisconsin, USA

Advertisement

Table of Contents
loading

This manual is also suitable for:

92‑877695k1

Table of Contents