Sensor - Wasp WPL618 Series User Manual

7.4

Sensor

This option is used to calibrate the selected sensor. We recommend calibrate the sensor
before printing when changing the media.
Menu
Item
Auto
Calibration
Manual setup
Threshold
Detect
Maximum
Length
Advanced
Auto
Calibration
Manual Setup
Sensor
Threshold
Detect
Maximum
Length
Advanced
Description
This option is used to set the media sensor type and
calibrate the selected sensor automatically. Printer will feed
2 to 3 gap labels to calibrate the sensor sensitivity
automatically.
In case "Automatic" cannot apply to the media, please use
"Manual" function to set the paper length and gap/bline size
then scan the backing/mark to calibrate the sensor
sensitivity.
Note: The "Media Capacity" item is used to calibrate the
media capacity sensor %.
This option is used to set sensor sensitivity in fixed or auto.
This option is used to set the maximum length for label
calibration.
This function can set the minimum paper length and
maximum gap/bline length for auto-calibrate the sensor
sensitivity.
- 46 -
Gap
Black Mark
Continuous
Preprint
Gap
Black Mark
Continuous
Media Capacity
Auto
Fixed
Default
N/A
N/A
Auto
254 mm
0 mm