Streamer Unit; Checking Procedures; Repair Procedures - Daikin FTXA20A Service Manual

2.16 Streamer unit

2.16.1 Checking procedures

2.16.2 Repair procedures

To remove the streamer unit
FTXA20~50A(W)(S)(T) + FTXA20~50B(B)(S)(T) + RXA42+50A +
RXA20~35A(9) + RXA42+50B
Split Stylish R32
ESIE18-03D – 2021.05
1 As there is no specific check procedure for this component, first perform a
check of the indoor unit main PCB to check if the streamer unit needs to be
replaced. See "2.8.1 Checking
After complete check of the indoor unit
main PCB, is the problem solved?
Yes
No
Prerequisite: Stop the unit operation via the user interface.
Prerequisite: Turn OFF the respective circuit breaker.
Prerequisite: Remove the required plate work, see
1 Disconnect the connector from the streamer unit.
a
a Streamer unit connector
b Streamer unit
2 Click the streamer unit out of the indoor unit.
3 To install the streamer unit, see
4
procedures" [ 75].
Action
No further actions required.
Replace the streamer unit, see
"2.16.2 Repair
b
"2.16.2 Repair
2 Components
|
4
procedures" [ 137].
4
"2.14 Plate work" [ 120].
4
procedures" [ 137].
Service manual
137