` Super IO Configuration
& Serial Port (Onboard COMA Connector)
Enables or disables the onboard serial port. (Default: Enabled)
& Serial Port (Onboard COMB Connector)
Enables or disables the onboard serial port. (Default: Enabled)
` Serial Port Console Redirection
This section allows you to enable/disable serial port console redirection for remote server management
through a serial port.
` Intel TXT Information
This section displays information about Intel
` USB Configuration
& Legacy USB Support
Allows USB keyboard/mouse to be used in MS-DOS. (Default: Enabled)
& XHCI Hand-off
Determines whether to enable XHCI Hand-off feature for an operating system without XHCI Hand-off
support. (Default: Enabled)
& USB Mass Storage Driver Support
Enables or disables support for USB storage devices. (Default: Enabled)
& Mass Storage Devices
Displays a list of connected USB mass storage devices. This item appears only when a USB storage
device is installed.
` Network Stack Configuration
& Network Stack
Disables or enables booting from the network to install a GPT format OS, such as installing the OS from
the Windows Deployment Services server. (Default: Disabled)
& IPv4 PXE Support
Enables or disables IPv4 PXE Support. This item is configurable only when Network Stack is enabled.
& IPv4 HTTP Support
Enables or disables HTTP boot support for IPv4. This item is configurable only when Network Stack is
enabled.
& IPv6 PXE Support
Enables or disables IPv6 PXE Support. This item is configurable only when Network Stack is enabled.
& IPv6 HTTP Support
Enables or disables HTTP boot support for IPv6. This item is configurable only when Network Stack is
enabled.
& PXE boot wait time
Allows you to configure how long to wait before you can press <Esc> to abort the PXE boot.
& Media detect count
Allows you to set the number of times to check the presence of media.
NVMe Configuration
Displays information on your M.2 NVME PCIe SSD if installed.
Trusted Execution Technology.
®
- 34 -