Table of Contents
Advertisement
` Advanced Voltage Settings
` Advanced Power Settings
& CPU Vcore Loadline Calibration
Allows you to configure Load-Line Calibration for the CPU Vcore voltage. Selecting a higher level keeps
the CPU Vcore voltage more consistent with what is set in BIOS under heavy load. Auto lets the BIOS
automatically configure this setting and sets the voltage following Intel's specifications. (Default: Auto)
& CPU Vcore Protection
Allows you to set the over-current protection level for the CPU Vcore voltage. The adjustable range is
from 150.0mV to 400.0mV. Auto lets the BIOS automatically configure this setting. (Default: Auto)
& VAXG Protection
Allows you to set the over-current protection level for the CPU VAXG voltage. The adjustable range is
from 150.0mV to 400.0mV. Auto lets the BIOS automatically configure this setting. (Default: Auto)
& CPU Vcore Current Protection
Allows you to set the over-current protection level for the CPU Vcore voltage.
Auto
Standard~Extreme
& CPU Vcore PWM Switch Rate
Allows you to set the PWM frequency for the CPU Vcore voltage. The adjustable range is from 300.0KHz
to 500.0KHz. (Default: Auto)
& VAXG PWM Switch Rate
Allows you to set the PWM frequency for the CPU VAXG voltage. The adjustable range is from 300.0KHz
to 500.0KHz. (Default: Auto)
` CPU Core Voltage Control
This section provides CPU voltage control options.
` Chipset Voltage Control
This section provides Chipset voltage control options.
` DRAM Voltage Control
This section provides memory voltage control options.
` Internal VR Control
This section provides VR voltage control options.
` PC Health Status
& Reset Case Open Status
Keeps or clears the record of previous chassis intrusion status. (Default)
Disabled
Clears the record of previous chassis intrusion status and the Case Open field will
Enabled
show "No" at next boot.
& Case Open
Displays the detection status of the chassis intrusion detection device attached to the motherboard CI
header. If the system chassis cover is removed, this field will show "Yes", otherwise it will show "No". To
clear the chassis intrusion status record, set Reset Case Open Status to Enabled, save the settings to
the CMOS, and then restart your system.
& CPU Vcore/CPU VCCSA/DRAM Channel A/B Voltage/+3.3V/ +5V/+12V/CPU VAXG
Displays the current system voltages.
Lets the BIOS automatically configure this setting. (Default)
Selects Standard, Low, Medium, High, Turbo, or Extreme which represents
different level of over-current protection for the CPU Vcore voltage.
- 29 -
Advertisement
Table of Contents
