Table of Contents
Advertisement
& Fan Control Use Temperature Input
Allows you to select the reference temperature for fan speed control. (Default: System 1)
& Temperature Interval
Allows you to select the temperature interval for fan speed change. (Default: 1)
& System 2 Fan Control Mode (SYS_FAN2A/SYS_FAN2B Connector)
Lets the BIOS automatically detect the type of fan installed and sets the optimal control
Auto
mode. (Default)
Voltage mode is recommended for a 3-pin fan.
Voltage
PWM mode is recommended for a 4-pin fan.
PWM
& System 2 Fan Speed Control (SYS_FAN2A/SYS_FAN2B Connector)
Allows you to determine whether to enable the fan speed control function and adjust the fan speed.
Allows the fan to run at different speeds according to the system temperature. You
Normal
can adjust the fan speed with System Information Viewer based on your system
requirements. (Default)
Allows the fan to run at slow speeds.
Silent
Allows you to control the fan speed under the Fan Speed Percentage item.
Manual
Full Speed
Allows the fan to run at full speeds.
& Fan Speed Percentage
Allows you to control the fan speed. This item is configurable only when System 2 Fan Speed Control
is set to Manual. Options are: 0.75 PWM value /
& Fan Control Use Temperature Input
Allows you to select the reference temperature for fan speed control. (Default: System 1)
& Temperature Interval
Allows you to select the temperature interval for fan speed change. (Default: 1)
` Miscellaneous Settings
& Max Link Speed
Allows you to set the operation mode of the PCI Express slots to Gen 1, Gen 2, or Gen 3. Actual operation
mode is subject to the hardware specification of each slot. Auto lets the BIOS automatically configure
this setting. (Default: Auto)
& 3DMark01 Enhancement
Allows you to determine whether to enhance some legacy benchmark performance. (Default: Disabled)
C ~ 2.50 PWM value /
C.
o
o
- 31 -
Advertisement
Table of Contents
