Gigabyte W480M VISION W User Manual page 47

Table of Contents

Advertisement

A-2: Installation in Intel RST Premium With Intel Optane System Acceleration mode
If the SATA controller has been configured in Intel RST Premium With Intel Optane System Acceleration
mode, please follow the steps below:
1. After system restarts, go to the BIOS Setup, make sure CSM Support under the BIOS menu is disabled.
2. Go to Peripherals\SATA And RST Configuration and make sure iRSTe Support and USE RST Legacy OROM is disabled
and RST Control PCIe Storage Devices is set to Manual.
the M2A_SB connector, set PCIe Storage Device On Port 9 to RST Controlled; to enable the Optane
memory installed in the M2Q_CPU connector, set PCIe Storage Device On Port 21 to RST Controlled.
3. Enter the operating system, launch the Intel
then enable Intel
Optane
®
4. If you install more than one Optane
which drive to be accelerated. Click Enable. Follow the on-screen instructions to proceed. When completed,
restart the system.
5. Launch the Intel
Rapid Storage Technology utility from the Start menu and make sure the Intel
®
Memory has been enabled. If you want to accelerate the system drive, you can select specific folders, files,
or applications to accelerate using the Intel
used must have at least 32 GB capacity.)
• An Optane
memory cannot be used to accelerate an M.2 PCIe SSD.
• If more than one Optane
your SATA-based boot drive. The other(s) can only be used as data drive(s).
• Do not abruptly remove the Optane
functioning correctly.
• If you want to change/remove the Optane
Storage Technology or Intel(R) Optane
• After enabling the Optane
update.
If you want to enable the Optane
Rapid Storage Technology utility from the Start menu, and
®
Memory on the Intel
Optane
®
memory, please select which one you are going to use. Then select
Optane
Memory Pinning function. (The Optane
®
memory is installed, you can select only one of them to accelerate
memory. Doing so will cause the operating system to stop
memory, you must disable it using the Intel
Memory application first.
memory, the related BIOS settings will remain even after a BIOS
- 47 -
memory installed in
Memory screen.
Optane
®
memory
Rapid
®

Advertisement

Table of Contents
loading

Table of Contents