Installation And Operating Instructions; Location; Icemaker - Hoshizaki SRK-15J Instruction Manual

Modular crescent cuber including condensing unit
Table of Contents

Advertisement

II. Installation and Operating Instructions
• The icemaker and remote condensing unit must be installed in accordance with
applicable national, state, and local codes and regulations.
• Failure to install, operate, and maintain the equipment in accordance with this
manual will adversely affect safety, performance, component life, and warranty
coverage and may result in costly water damage.
• CHOKING HAZARD: Ensure all components, fasteners, and thumbscrews
are securely in place after installation. Make sure that none have fallen into the
dispenser unit/storage bin.
A. Location

1. Icemaker

• This icemaker is not intended for outdoor use. Normal operating ambient
temperature must be within 45°F to 100°F (7°C to 38°C); Normal operating
water temperature must be within 45°F to 90°F (7°C to 32°C). Operation of the
icemaker, for extended periods, outside of these normal temperature ranges may
affect icemaker performance.
• This icemaker will not work at sub-freezing temperatures. To prevent damage
to the water supply line, drain the icemaker if the air temperature is going to go
below 32°F (0°C). See "III.C. Preparing the Icemaker for Periods of Non-Use."
• The icemaker should not be located next to ovens, grills, or other high heat producing
equipment.
• No clearance is required for proper operation.
• The location must provide a firm and level foundation for the equipment.
WARNING
NOTICE
9

Advertisement

Table of Contents
loading

This manual is also suitable for:

Kms-1402mljSerenity seriesSrk-15j/3

Table of Contents