Verizon MI424WG User Manual page 59

from the "WAN Connection Type" drop-down list.
6. To select a port to forward communications to (this is optional), select
"Specify" from the "Forward to Port" drop-down list, then, in the text box
that appears, enter the port number. If no port is identified, select "Same as
Incoming Port. "
7.
If this port will be active all the time, select "Always" from the "Schedule"
drop-down list. If the rule will only be active at certain times, select "User
Defined" and click Add. Then, add a schedule rule (for more details about
schedule rules, see the "Advanced Settings" chapter of this manual).
8. If source and destination ports need to be specified, select Specify from the
drop-down menu list (by clicking on the appropriate arrow), then entering
the port numbers.
9. Click Apply to save the changes. The new port forwarding rule appears in
the "Applied rules" table at the bottom of the screen.
Note: Some applications, such as FTP, TFTP, PPTP, and H323, require the support
of special specific Application Level Gateway (ALG) modules to work inside the
local network. Data packets associated with the aforementioned applications
contain information that allows them to be routed correctly. An ALG is needed
to handle these packets and ensure they reach their intended destinations. The
FiOS Router is equipped with a robust list of ALG modules, enabling maximum
functionality in the local network. The ALG is automatically assigned based on
the destination port.
4.2f View Device Details
To view information about a networked device, or to test a device's connection,
locate the device in the My Network column, then click View Device Details.
The "Device Information" screen appears.
FiOS Router User Manual
59
© 2009 Verizon. All Rights Reserved.