Table of Contents
Advertisement
appropriate text box.
Policy
Select a QoS policy from the drop-down menu. Options include Priority, FIFO
(First In, First Out), Fairness (balanced set), RED (Random Early Detection), and
WRR (Weighted Round Robin).
When should this rule occur?
By default, the rule will always be active. However, scheduler rules can be
configured to define time periods during which the rule is active. To learn how
to configure scheduler rules, see the "Advanced Settings" chapter.
A.2c Ingress Data
The FiOS Router can control outgoing data fairly easily. It can queue packets,
delay them, give precedence to other packets, or drop them. This helps in
resolving upload (Tx) traffic bottlenecks, and in most cases is sufficient. However,
in the case of download (Rx) traffic bottlenecks, the ability to control the flow is
much more limited. The FiOS Router cannot queue packets, since in most cases
the local network (LAN) is much faster then the Internet (WAN), and when the
FiOS Router receives a packet from the Internet, it passes it immediately to the
local network.
QoS for ingress data has the following limitations, which do not exist for
outgoing data:
•
QoS can only be applied to TCP streams (UDP streams cannot be delayed)
•
No borrowing mechanism
•
When reserving Rx bandwidth, it is strictly taken from the bandwidth of all
other classes
Furthermore, the FiOS Router cannot control the behavior of the ISP, which may
not have proper QoS handling. Unfortunately, this is a common situation. Let's
look at a scenario of downloading a large file and surfing the Internet at the
same time. Downloading the file is distinguished by small requests, followed
by very large responses. This may result in blocking HTML traffic at the ISP.
195
FiOS Router User Manual
© 2009 Verizon. All Rights Reserved.
Advertisement
Table of Contents
