Verizon MI424WG User Manual page 37

802.1x WEP
If 802.1x WEP (Wired Equivalent Privacy) was selected, the "WEP+802.1x Radius
Settings" screen appears. To generate the full screen, click in the "Enabled" check
box to activate.
802.1x WEP is a robust security protocol that uses port control with dynamically
changing encryption keys automatically updated over the network. 802.1x WEP
uses a RADIUS (Remote Authentication Dial-in Service) server for authentication
purposes. This server must be physically connected to the FiOS Router. Also, the
user must enable the RADIUS client embedded in the FiOS Router (to do this,
see chapter 9, "Advanced Settings").
1.
Click in the "Enabled" check box to enable WEP+802.1x security.
2. Enter the RADIUS server IP address in the "Server IP" text boxes.
3.
Enter the RADIUS server's port number in the "Server Port" text box.
4. Enter the RADIUS server's shared secret in the "Shared Secret" text box.
5. Apply to save changes.
Click
FiOS Router User Manual
37
© 2009 Verizon. All Rights Reserved.