Table of Contents
Advertisement
2.
After choosing the traffic direction and the device on which to set the
rule, click Add in the appropriate row. The "Add Traffic Priority Rule" screen
appears.
Set the following parameters:
Source Address
The source address of the packets sent to or received from the network object.
To add an address:
1.
Select "
User Defined" from the drop-down list. The screen refreshes and an
"Add" link appears.
2.
Add, then add a new network object (see the "Advanced Settings"
Click
chapter to learn how to add a network object). Clicking Add is the same as
clicking New Entry in the Network Objects screen.
Destination Address
The destination address of the packets sent to or received from the network
object. This address can be configured in the same manner as the source
address.
189
FiOS Router User Manual
© 2009 Verizon. All Rights Reserved.
Advertisement
Table of Contents
