Table of Contents
Advertisement
2. Remove the PCI slot cover on the back of the PC by unfastening it.
3. Insert the IEEE1394 board onto the motherboard by firmly pressing down on the board and using a
rocking motion.
Inserting the IEEE1394 Board into the PC.
4. Secure the board to the PC by fastening the board to the back of the case.
Securing the board to the PC.
5. Reverse the cover removal procedure to fasten the cover on the PC.
Caution:
Take care that no cables are pinched or unplugged when installing the cover.
XEScan Solution Installation Guide
19
Advertisement
Table of Contents
