Table of Contents
Advertisement
To Cluster 2 Master Host
To Cluster 1 Master Host
Bus A
Bus B
CSM
SCSI ID Assignments shown from front of enclosure
In this configuration the SCSI bus is split, with each of the connectors
attached to a host. If a host is disconnected from the enclosure, the
CSM isolates the disconnected host from the internal storage and
remaining hosts. This allows a host to be taken offline without data
disruption to the other hosts. For left side CSM, the Bus A LED is on for
top connector and Bus B LED is on for bottom connector. For right side
CSM, the Bus B LED is on for top connector and Bus A LED is on for
bottom connector. The ES LED is on for both CSM's.
Note: For information on the I/O module LED, see page 20.
1
2
Mute
To Cluster 1 Slave Host
To Cluster 2 Slave Host
1
2
Bus B
Bus A
CSM
29
Advertisement
Table of Contents
