Table of Contents
Advertisement
To Host
To Host
ID 7
ID 7
CSM
The CSM and TSM can be in either I/O slot of the enclosure.
SCSI ID Assignments shown from front of enclosure.
Note: For information on the host connectors, refer to the
documentation supplied with the host system.
4
The Bus A LED
will be on for the top connector, to indicate the first
seven disks are on Bus A. The Bus B LED will be on for bottom
connector to indicate that the remaining seven disks are on Bus B. The
Environmental Services (ES) LED is ON for both the CSM and TSM, to
show that both of their ES blocks are active.
Note: Both I/O modules are at ID 15. These modules actively
monitor one of the two buses, respectively.
For information on the I/O module LED, see page 20.
4
Enclosure must be powered on to see the LEDs.
1
2
Mute
27
1
2
TSM
Advertisement
Table of Contents
