Powering The Unit - Sony HDPS-M10 Manual

Powering the unit

Charging the battery
When the AC power adapter is connected to the unit, the internal battery starts
charging. A battery charge indicator appears on the display during charging.
When the battery is fully charged, the LCD display shows the message "FULL
CHARGE" before it turns off. The charging process takes about 4 hours at
ambient temperature.
Battery charging in progress
Confirming full battery charge
After the charging process is complete, turn on the unit while the AC power
adaptor is still connected, and make sure that the
Battery icon
Hints
• The internal battery charges even when the unit is in use, as long as the AC power adapter
is connected. However, the charge time is considerably longer than when the internal
battery is charged as outlined above.
• If the unit has not been charged for some time, the internal battery level may be depleted.
When the unit is turned on, the low battery level may cause the battery icon at the top left
corner of the LCD display not to appear.
No battery icon
To recover, fully charge the battery using the supplied AC power adapter. Do not remove
the adapter while charging is in progress.
6 GB
!
To the (DC In) connector
Battery is fully charged
To the AC outlet
icon appears.