Table of Contents
Advertisement
Step 9:
Choose to keep the name already programmed into this
group by pressing ENTER or program a new name by
pressing EDIT.
Step 10:
Type in the name for the tool. Press button next to letter,
multiple times if needed, to get the wanted letter. Select
ADD CHAR at the bottom to add the letter to the name.
Repeat until name appears as desired. Press SAVE.
Step 11:
Turn off the control panel. If the control panel is on,
remove and then reinsert the battery pack. Engage the
switch. Check the Assembly Qualifier's display.
Step 12:
Upon successful completion of the learn process, press
the return key to get back to the main screen.
Step 13:
At this point, the box and the tool know how to
communicate with each other. However, the tool's
parameter set (group) may need to be edited so that it
is monitoring the fastening process properly.
- 6 -
Advertisement
Table of Contents
