Table of Contents
Advertisement
Sequencing:
If sequencing is off, the AQ wireless will operate from one group (parameter) until the
user changes the group either from the user interface or through the I/O.
If sequencing is on, the unit will start in group A until a batch is completed. Once the
batch completes, the unit will automatically change to the next parameter until the end
parameter is reached. Once the end parameter is reached and the batch is completed,
the unit will automatically return to group A.
The sequence setting can be altered by pressing the number that represents the
sequence that the user desires. Pressing a number key will automatically select and
save the new sequence setting to non-volatile memory.
The Escape key can be pressed at any point to exit this routine without selecting or
saving a new sequence setting.
The AQ Wireless can be set up so that it automatically
changes from group to group as batches are completed.
This function is called sequencing.
In order to edit the sequencing function, press the Edit
Sequence soft-key on the second menu screen. The
keypad screen will appear showing the user the current
sequence setting and allow them to alter that setting.
- 1 -
Advertisement
Table of Contents
