Disk Drives; Floppy Drives - Acer Altos 500 Series User Manual

2.4

Disk Drives

Select Disk Drives to input configuration values for disk drives.
The following screen shows the Disk Drives menu screen:
Diskette Drive A .......................[xx-MB, xx-inch]
Diskette Drive B .......................[
LS-120 Drive as ........................[ Normal ]
IDE Primary Channel Master
IDE Primary Channel Slave
IDE Secondary Channel Master
IDE Secondary Channel Slave
2.4.1

Floppy Drives

To enter the configuration value for the first floppy drive (drive A), highlight the
Floppy Drive A parameter. Press
appropriate value.
Possible settings for the Floppy Drive parameters are:
[ None
[360 KB, 5.25-inch]
[1.2 MB, 5.25-inch]
[720 KB, 3.5-inch]
[1.44 MB, 3.5-inch]
[2.88 MB, 3.5-inch]
Follow the same procedure to configure floppy drive B. Choose None if you do
not have a second floppy drive.
Altos 500 Series User's Guide
Disk Drives
or
]
None
key to view the options and select the
]