Installing Additional Hard Disk Drives With Carriers In The Optional Bay Cage - Acer AT350 F2 Series Service Manual

38
Installing additional hard disk drives with
carriers in the optional bay cage
If you intend to install an additional HDD, you first need to remove the hard
disk drive cover from the hard drive bay.
1 Observe the ESD precautions described on page 26.
2 Observe the pre-installation instructions described on page 26.
3 Remove the side panel described on page 28.
4 Unlock the bezel door then pull it open.
5 Pull the HDD cover straight out of the drive bay.
3.5-inch HDD bays
3 System upgrades