Table of Contents
Advertisement
LVDS Cable Installation
0
1. Place the LVDS cable into the LCD panel connector (D) and secure the clear mylar
tape (C)
(Figure
3-41).
2. Adhere the yellow tape (B) to the LVDS cable connector to secure it
(Figure
3-40).
3. Place the LVDS cable (E) on the rear of the LCD panel. Refer to
Figure
3-42.
4. Adhere the sliver masking tapes. Refer to
Figure
3-39.
5. Install the LCD panel.
3-40
Machine Maintenance Procedures
Advertisement
Chapters
Table of Contents
