Using Uuid Tools - Acer AOD270 Service Manual

Using UUID Tools

The UUID (Universally Unique Identifier) Tool copies BIOS information to EEPROM
(Electrically Erasable Programmable Read-Only Memory). Used in the DMI Pool data for
hardware management.
UUID,
To use
1. Unzip UUID package tool to USB Flash Disk.
2. Boot from USB and excute stuuid20.exe under DOS mode.
3. Execute stuuid20 s 1 0 (where 1 is the PCI bus and 0 is the device ID).
Figure 2-28. UUID Tool Main Screen
4. At the command prompt, run VEEPROM.exe to write any changes in the data to the
EEPROM.
2-24
perform the following:
0
(Figure 2-28)
System Utilities