LVDS and Camera Cable Installation
1. Place LVDS and camera cable on the rear of the LCD panel. Refer to
2. Place the LVDS cable into the LCD panel connector (E) and secure the clear mylar tape
(D). Refer to
3. Adhere the yellow tape (C) to secure the LVDS cable in place. Refer to
4. Adhere the clear mylar tape (B) to secure the camear cable in place. Refer to
Figure
3-47.
5. Replace the adhesives to secure the LVDS and camera cable on the rear of the LCD
panel in place
6. Install LCD panel.
3-50
Figure
3-49.
(Figure
3-46).
Figure 3-46
Machine Maintenance Procedures
0
.
Figure
3-48.