Acer AOD270 Service Manual page 62

2. Type current password in Enter Current Password field and press
Enter
3. Press
New Password fields. Computer will set the Supervisor Password parameter to
Clear.
F10
4. Press to save changes and exit the
Changing a Password
1. Use the ↑ and ↓ keys to highlight the Set Supervisor Password and press
The Set Supervisor Password dialog box appears.
Figure 2-6. Set Supervisor Password
2. Type current password in Enter Current Password field and press
3. Type new password in Enter New Password field. Retype new password in
Confirm New Password field.
Enter
4. Press
NOTE: NOTE:
Password on Boot must be set to Enabled to activate the password
feature.
F10
5. Press to save changes and exit
If the verification is OK, the screen will show as follows.
Figure 2-7. Setup Notice
The password setting is complete after the user presses
If the password entered does not match the current password, the screen shows the
Setup Warning dialog.
2-10
twice without typing anything in Enter New Password and Confirm
. Computer sets the Supervisor Password parameter to Set.
(Figure 2-8)
BIOS Setup Utility
BIOS Setup Utility
.
Enter
Enter
.
.
Enter
.
.
System Utilities
0
Enter
.